Webpage Copyright(c)2020 Luoyang Yusion Industrial Co., Ltd.
PRODUCT
S-2 Tool Steel Ball(Rockbit)
S-2 Tool Steel balls are designed to achieve extreme ruggedness.The ball surface has a smooth ground and polished finish.These balls provide the toughness and strength necessary for severe shock loads.S-2 Tool Steel balls are hardened throughout and have unusually good wear characteristics.
S-2 Tool Steel balls find most frequent use in oil field equipment and offshore drilling operations.They provide good service in withstanding the abrasion of pulverized rock and mud slurries.
Material |
AISI |
Military ASTM |
UNS AMS |
DIN |
JIS/SUJ |
S-2 Tool Steel |
S-2 |
A-681 |
T-41902 |
|
|
Additional testing may be required to certify that materials comply with specific standards. |
MATERIAL ANALYSIS
S-2 Tool Steel (Rockbit) balls are manufactured to the following chemical analysis:
Chemical Analysis |
|
Carbon |
0.47% to 0.55% |
Manganese |
0.30% to 0.50% |
Silicon |
0.90% to 01.10% |
Molybdenum |
0.30% to 0.60% |
Phosphorus |
0.030% maximum |
Sulphur |
0.030% maximum |
Vanadium |
0.5% maximum |
MECHANICAL PROPERTIES
Hardness as measured on parallel flat surfaces is Rockwell “C”55-59.Ball of special hardness are available upon request.
Tensile strength |
310,000 psi |
Elongation in two inches |
7% |
Reduction in area |
25% |
Modulus of elasticity |
30,000,000 psi |
AVAILABLE GRADES AND SIZES
Grade |
Size Range in Inches and Millimeters |
28-200 |
3/8”-2-1/4” 9.525mm-57.15mm |